Filter
Top Products
2-202-20
2-202-20
2-20
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
HeadHead
HeadHead
Head
Shows the number of the hard disk read/write heads. This item is not
configurable.
PrecompPrecomp
PrecompPrecomp
Precomp
Shows the number of precomp per track. This item is not configurable.
Landing ZoneLanding Zone
Landing ZoneLanding Zone
Landing Zone
Shows the number of landing zone per track. This item is not configurable.
SectorSector
SectorSector
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.
2.3.72.3.7
2.3.72.3.7
2.3.7
HDD SMART MonitoringHDD SMART Monitoring
HDD SMART MonitoringHDD SMART Monitoring
HDD SMART Monitoring
Allows you to enable or disable the HDD Self-Monitoring Analysis and
Reporting Technology (SMART) feature.
Configuration options: [Disabled] [Enabled]
2.3.82.3.8
2.3.82.3.8
2.3.8
Installed MemoryInstalled Memory
Installed MemoryInstalled Memory
Installed Memory
Shows the size of installed memory.