Filter
Top Products
5-38 Chapter 5: Software support
The online copy option automatically copies the data to the target
drives on the background while writing to the source drives. The offline
copy option allows you to copy the contents of the source drive to the
target drives now.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press <Enter> to set the
first drive of the RAID set.
d. Repeat step c to set the second, third, and fourth drive. The
number of available drives depend on the installed and enabled
physical drives in the system.
• The Create with data copy option allows you to copy the current
data from the source drive to the mirror drive. The Create without
data copy option disables the disk copy function of the Mirrored set.
• If you selected Create without data copy , the RAID 1 set must be
repartitioned and reformatted to guarantee the consistency of its
contents.
• Select Create with data copy if you have important data in your
source drive.
MAIN MENU
Auto configuration
Manual configuration
Create with data copy
Create without data copy
e. After setting the
RAID drives, the
following pop-up
menu appears.
f. If you selected
Create with data
copy, the following
pop-up menu
appears.
MAIN MENU
Auto configuration
Manual configuration
online copy
offline copy