Filter
Top Products
ASUS A8V-E DeluxeASUS A8V-E Deluxe
ASUS A8V-E DeluxeASUS A8V-E Deluxe
ASUS A8V-E Deluxe
5-235-23
5-235-23
5-23
RAID Span for capacityRAID Span for capacity
RAID Span for capacityRAID Span for capacity
RAID Span for capacity
1. From the create array menu, select
Array ModeArray Mode
Array ModeArray Mode
Array Mode, then press <Enter>.
The supported RAID configurations appear on a pop-up menu.
2. Select
RAID SPAN for capacityRAID SPAN for capacity
RAID SPAN for capacityRAID SPAN for capacity
RAID SPAN for capacity then press <Enter>.
3. From this point, you can auto-configure the RAID array by selecting
Auto Setup for Capacity Auto Setup for Capacity
Auto Setup for Capacity Auto Setup for Capacity
Auto Setup for Capacity or manually configure the RAID array for
spanned sets. If you want to auto-configure, continue with next step;
otherwise, proceed to step 6.
4. Select
Auto Setup for CapacityAuto Setup for Capacity
Auto Setup for CapacityAuto Setup for Capacity
Auto Setup for Capacity and press <Enter>. The following
confirmation message appears.
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
RAID SPAN for capacity
Auto create array will destroy all
data on disks, Continue? (Y/N)
5. Press <Y> to confirm or <N> to return to the configuration options. If
you selected <Y>, proceed to step 11.
6. Select
Select Disk DrivesSelect Disk Drives
Select Disk DrivesSelect Disk Drives
Select Disk Drives, then press <Enter>. Use arrow keys to
select disk drive/s, then press <Enter>. An asterisk appears before a
selected drive.
7. Select
Start Create ProcessStart Create Process
Start Create ProcessStart Create Process
Start Create Process and press <Enter> to start RAID
system setup. The following inquiry appears:
8. If you select <Y>, the utility will save your disk data on Span 0 disk
then configure the RAID set. Proceed to step 11.
9. If you select <N>, the following confirmation message appears.
The data on the selected disks will
be destroyed. Continue? (Y/N)
Save the data on Span 0 disk
after creation? (Y/N)