Filter
Top Products
ASUS AK34 chassis kit
2-19
2.7 Removable components
When installing or removing system devices, you may need to remove
previously installed components. This section describes how to remove
these components.
2.7.1 Chassis fan
To remove the 12-cm chassis fan:
1. Disconnect the 3-pin fan cable from the connector on the motherboard.
2. Use a flat screwdriver to push the pin locks on the four corners of the
fan from the inside of the chassis.
3. Pull out the pin locks from the rear panel.
4. Remove the chassis fan.
Chassis fan cable
Pin lock (tail-end)
Pin lock