Filter
Top Products
ASUS AK34 chassis kit
A-3
Problem Action
The system continuously beeps
after it was turned on
1. Check the memory modules
and make sure you installed
the DIMMs the system
supports.
2. Make sure that the DIMMs are
properly installed on the
sockets.
3. Check if it has a VGA ouput.
The message “Non-system disk
or disk error” appears
1. Check if a bootable HDD is
active.
2. Check if the HDDs are
properly installed. On SCSI
models, make sure that the
cables are properly connected
to the SCSI connectors on the
backplane.
Network connection not
available
1. Make sure that the network
cable is connected to the
RJ-45 port on the rear panel.
2. Make sure that you have
installed the LAN drivers from
the support CD.