Filter
Top Products
5-30
Chapter 5: BIOS setup
Init Slot 1, 2, 3, 4, 5, 6 IRQ [Normal]
This field allows you to set the priority level for each expansion slot in
order to determine expansion card initialization order. Configuration
options: [High] [Normal] [Low] [Skip]
5.6.1 Boot Configuration
MPS 1.4 Support [Enabled]
This field allows you to enable or disable the MultiProcessor Specification
1.4 support. Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping
retesting a second, third, and fourth time. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy disk drive to determine
whether the drive has 40 or 80 tracks. Configuration options: [Disabled]
[Enabled]