Filter
Top Products
Chapter 2: Hardware setup
2-2
2.1 Chassis cover
The chassis features a “screwless design” that allows convenient
assembly and disassembly.
• Remove the front bezel to access the hot-swap HDDs, optical drive, and
floppy drive.
• Remove the chassis cover to access the internal components or if you
wish to install system devices.
2.1.1 Removing the front bezel
To remove the front bezel:
1. Hold the sides of the front bezel,
then slightly press the middle part
to disengage it from the front
panel.
2. Pull the bezel from the front
panel.
Press here to release