Asus asus pc Computer Hardware User Manual


 
5-3ASUS V-Series M2V890
2. Copy the original or the latest motherboard BIOS le to the bootable
oppy disk.
5.1.2 ASUS EZ Flash utility
The ASUS EZ Flash feature allows you to update the BIOS without having
to go through the long process of booting from a oppy disk and using
a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS
le for your motherboard and rename the downloaded le as M2VTVM.
ROM. Save the BIOS le to a oppy disk.
2. Reboot the system.
3. To launch EZ Flash, press <Alt+F2> during POST to display the
following.
User recovery requested. Starting BIOS recovery...
Checking for floppy...
If there is no oppy disk in the drive, the error message “Floppy not
found!” appears.
If the correct BIOS le is not in the oppy disk, the error message
“Floppy not found!” is displayed. Make sure to rename the
downloaded BIOS le as “M2VTVM.ROM”.
4. Insert the oppy disk that contains the BIOS le. If all the necessary
les are found in the oppy disk, EZ Flash performs the BIOS update
process and automatically reboots the system when done.
User recovery requested. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “M2VTVM.ROM”. Completed.
Start flashing...
Flashed successfully. Rebooting.
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!