Filter
Top Products
ASUS AT5IONT-I Series 1-10
1. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the
Serial ATA 1.5Gb/s specication. The data transfer rate of the Serial ATA 3Gb/s is faster
than the standard parallel ATA (133 MB/s).
• Install the Windows
®
XP Service Pack 2 or later versions before using Serial ATA.
1.7.2 Internal connectors
SATA1
GND
RSATA_RXN1
RSATA_RXP1
GND
RSATA_TXN1
RSATA_TXP1
GND
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
A
T5
I
O
N
T-
I
DE
L
UXE
AT5IONT-I DELUXE SATA connectors
2. ATX power connector (24-pin EATXPWR) (for AT5IONT-I only)
This connector is for an ATX power supply. The plug from the power supply is designed
to t this connector in only one orientation. Find the proper orientation and push down
rmly until the connector completely ts.
• For a fully congured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specication 2.0 (or later version) and provides a minimum
power of 90 W.
• We recommend that you use a PSU with higher power output when conguring a
system with more power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
• If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
AT5
I
O
N
T-
I
AT5IONT-I ATX power connector