Filter
Top Products
1-13 Chapter 1: Product introduction
7. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin HD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or ashes when data is read from or written to
the HDD.
•
ATX power button/soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
AT5
I
O
N
T-
I
DE
L
UXE
AT5IONT-I DELUXE System panel connector
PIN 1
PWR BTN
GND
PWR
PLED-
PLED+
Reset
Ground
IDE_LED-
IDE_LED+
F_PANEL
PWR LED
HD_LED RESET
8. SATA power connectors (4-pin SATA_PWR1) (for AT5IONT-I DELUXE only)
This connectors is for SATA power cable. The power cable plug is designed to t this
connector in only one orientation. Find the proper orientation and push down rmly until
the connector completely t.
AT5
I
O
N
T-
I
DE
L
UXE
AT5IONT-I DELUXE SATA power connector