Filter
Top Products
18 GigaX Smart Switch Centralized Network Management
Figure 4.6 Add Switch (GigaX 1024P)
5. Add Switch: add a switch to the topology tree manually. A window will show for
this purpose as shown below. Select the network adapter you want the switch to
attach to, give the switch MAC and name, and an authentication key as the
password if you don’t use the default one (2379), then click OK to finish the
action. However, a manually added switch does not mean it can be configured
or discovered by CNM. The function provides a way to add a known switch to
topology list once the CNM cannot discover the switch. There is a tool bar button
for it..
Figure 4.6.1 Add Switch (GigaX 1024I)