Filter
Top Products
GigaX Smart Switch Centralized Network Management 37
Figure 4.22 VLAN Control Options
All VLAN behavior will be influenced by VLAN control option. Click Control
Option and a window will appear as shown as below. Enable or disable these
options carefully, these options are global setting for VLAN
7. VLAN function: enable or disable the VLAN function.
8. Unicast packet inter-VLAN leaky: to enable the packet to be forwarded to a
destination port (L2 table hit) at different VLAN.
9. ARP broadcast packet inter-VLAN leaky: to enable ARP frame to broadcast to
all switch ports.
10. IP multicast packet inter-VLAN leaky: to enable IP multicast packet to be flooded
to all the multicast address group member set ignore the VLAN member set
domain limitation.
11. 802.1Q VLAN tag aware: to enable tag-based VLAN function.
12. Ingress rule for acceptable frame types: to admit all frames or to admin only
VLAN-tagged frames.
13. Ingress rule for ingress filtering: to enable filter the frame received from a port
which port is not included in the classified VLAN group member.