Filter
Top Products
5-38 Chapter 5: Software support
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. Repeat step b to
select the target drive.
d. After selecting the
source and target
drives, the following
pop-up menu appears.
Manual conguration
a. Select Manual conguration
and press <Enter>. The
selection bar moves to the
Physical Drives menu.
b. Using the up or down arrow
keys, select the source drive
and press <Enter>.
3. Select your desired method of conguration.
Auto conguration
a. Select Auto Conguration then press <Enter>.
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
c. Press <Y> to conrm or <N> to return to the Main Menu.
• Auto-conguration creates a RAID 1 set without a backup copy of the
current source disk data.
• When migrating a single hard disk drive to a RAID 1 set, use of the Manual
conguration is recommended.
MAIN MENU
Auto conguration
Manual conguration
Create with data copy
Create without data copy
• The Create with data copy option allows you to copy the current data from
the source drive to the mirror drive.
• Select
Create with data copy if you have important data in your source
drive.
• The
Create without data copy option disables the disk copy function of
the Mirrored set.
• If you selected
Create without data copy, the RAID 1 set must be
repartitioned and reformatted to guarantee the consistency of its contents.