Filter
Top Products
5-40 Chapter 5: Software support
• Congure a CONCATENATION set when using a single Serial ATA drive;
otherwise, the system will not recognize the drive.
• You can also create a RAID set using the SATARAID5 GUI utility under a
Windows
®
environment.
Creating a CONCATENATION set
To create a CONCATENATION set:
1. From the Silicon Image
conguration utility main
menu, select Create RAID
set then press <Enter>.
2. From the sub-menu Select
CONCATENATION then
press <Enter>.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
3. The selection bar moves to the
Physical Drive menu. Using the up
or down arrow keys, select a drive
then press <Enter> to set a drive
for the RAID set.
4. The utility prompts a message to
input the RAID size, use the up or
down arrow keys to set the RAID
size then press <Enter>.
5. Press <Y> to conrm or <N> to return to the Main Menu.