Filter
Top Products
ASUS Eee PC
6-11
7. Connect the USB flash disk to your Eee PC.
8. Start the system and press
<F2> on bootup to enter the BIOS
setup. Go to Boot > Hard Disk Drives and select the USB drive
(may be labeled as “USB:XXXX”) as the 1st Drive.
9. Go to
Boot > Boot Device Priority and select the USB drive (may
be labeled as “USB:XXXX”) as the 1st Boot Device.
10 Press
<F10> to save the configuration and reboot from the USB
flash disk.
11.
Key in yes and press <Enter> to continue the system recovery.
12 When the recovery is completed, remove the USB flash disk and
press <Enter> to reboot the system.
Reformatting the USB flash disk
To use the USB disk on your Windows operating system normally,
follow the instructions below to reformat your USB disk.
1. Connect your USB flash disk to another PC/NB and insert the
Support DVD to that PC/NB at the same time.
2. Click
Utilities on the left and select ASUS Linux USB Flash
Utility.
3. Select
Format the USB flash
disk back to Windows format
(FAT16) and click Run.
4. Click OK to complete the disk
formatting.