Filter
Top Products
3-20
Chapter 3: BIOS setup
Chapter 3
CPU Analog I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
Allows you to congure the amount of voltage fed to the analog portion of the I/O on
the processor. Increase the amount of voltage when increasing DRAM frequency. Use
the <+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with
a 0.001V interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
Allows you to congure the amount of voltage fed to the digital portion of the I/O on the
processor. Increase the amount of voltage when increasing DRAM frequency. Use the
<+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with a
0.001V interval.
SVID Support [Auto]
Disabling SVID support stops the processor from communicating with the external voltage
regulator. Conguration options: [Auto] [Disabled] [Enabled]
• We recommend that you disable this function when overclocking.
• The following item appears only when you set SVID Support to
[Enabled].
SVID Voltage Override [Auto]
Allows you to set the SVID Voltage override. Use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 2.440V with a 0.001V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.185V to 1.800V with a 0.005V
interval.
According to Intel CPU specications, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65V.