Asus H97M-PLUS Computer Hardware User Manual


 
Target CPU Turbo-Mode Frequency: xxxxMHz
Displays the target CPU Turbo‑Mode frequency.
Target DRAM Frequency: xxxxMHz
Displays the target DRAM frequency.
Target Cache Frequency: xxxxMHz
Displays the target Cache frequency.
Target DMI/PEG Frequency: xxxxMHz
Displays the target DMI/PEG frequency.
Target CPU Graphics Frequency: xxxxMHz
Displays the target iGPU frequency.
2.5.1 CPU Core Ratio [Auto]
Allows you to set the CPU core ratio automatically or manually.
[Auto] Sets all CPU Core Ratio to Intel
®
CPU default settings automatically.
[Sync All Cores] Allows you to set CPU Core Ratio settings for all cores.
[Per Core] Allows you to set CPU Core Ratio individually.
The following two items appear only when you set the CPU Core Ratio to [Sync All
Cores] or [Per Core].
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1‑Core
Limit value, which should be higher than or equal to the 2‑Core Ratio Limit.
2-Core Ratio Limit [Auto]
Allows you to set the 2‑Core Ratio Limit. Select [Auto] to apply the CPU default Turbo
Ratio setting or manually assign a 2‑Core Ratio Limit value that is higher than or equal
to the 3‑Core Ratio Limit. 1‑Core Ratio Limit must not be set to [Auto].
3-Core Ratio Limit [Auto]
Allows you to set the 3‑Core Ratio Limit. Select [Auto] to apply the CPU default Turbo
Ratio setting or manually assign a 3‑Core Ratio Limit value that is higher than or equal
to the 4‑Core Ratio Limit. 1‑Core/2‑Core Ratio Limit must not be set to [Auto].
4-Core Ratio Limit [Auto]
Allows you to set the 4‑Core Ratio Limit. Select [Auto] to apply the CPU default Turbo
Ratio setting or manually assign a 4‑Core Ratio Limit value that is higher than or equal
to the 3‑Core Ratio Limit. 1‑Core/2‑Core/3‑Core Ratio Limit must not be set to [Auto].
2.5.2 Min. CPU Cache Ratio [Auto]
Allows you to set the uncore ratio of the processor to its possible minimum value. Use <+>/<‑
> to adjust the value. The values depend on the CPU installed.
2-14
Chapter 2: Getting started