Filter
Top Products
ASUS K8S-MX motherboard
2-23
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
PCI IDE BusMaster [Enabled]
Allows BIOS to use PCI bus mastering when reading/writing to IDE devices.
Configuration options: [Disabled] [Enabled]
OffBoard PCI/ISA IDE Card [Auto]
Allows you to set the PCI slot number where a PCI card is installed.
Configuration options: [Auto] [PCI Slot1] [PCI Slot2]
IRQ xx [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices.
When set to [Reserved], the IRQ is reserved for legacy ISA devices.
Configuration options: [PCI Device] [Reserved]
2.5 Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM) feature. Select an item then press <Enter> to display the
configuration options.
2.5.1 ACPI Aware O/S [Yes]
Allows you to enable or disable the ACPI support. Set to Yes if your operating
system (OS) supports ACPI. Configuration options: [No] [Yes]
ACPI Aware O/S [Yes]
Suspend Mode [S1 (POS) only]
ACPI 2.0 Support [No]
ACPI APIC Support [Enabled]
BIOS-->AML ACPI table [Enabled]
Headless mode [Disabled]
APM Configuration
Hardware Monitor
Enable/Disable
ACPI support for
Operating System.
ENABLE: If OS
supports ACPI.
DISABLE: If OS
does not support
ACPI.