![](http://pdfasset.owneriq.net/9/32/9322d74b-22ba-408a-9710-a1ba8043980a/9322d74b-22ba-408a-9710-a1ba8043980a-bg4c.png)
3-8
Chapter 3: Software support
Creating JBOD
1. From the RAID Setup, press <1> then <Enter> to select JBOD (Spanning)
2. Select <1> to auto-create a RAID array or press <2> to manually configure
array then press <Enter>.
3. If you selected 1 proceed to step 5.
4. Use the up/down arrow keys to move the selection bar, then press <Enter> to
select a disk drive.