Filter
Top Products
ASUS K8S-MX motherboard
2-25
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power
button is pressed. Configuration options: [On/Off] [Suspend]
Hard Disk Time Out (Minute) [Disabled]
Allows you to select the specified time in minute at which the hard disk goes on
standby mode. Configuration options: [Disabled] [1] [2] ~ [15]
Resume on Ring [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Resume on PME# [Disabled]
Allows you to enable or disable the PME to generate a wake event. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume on Keyboard [Disabled]
Allows you to disable or set the keyboard wake-up feature. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Any Key] [Space Bar] [Ctrl-Esc] [Power Key]
Resume on PS2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to
resume the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume on RTC [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]
Restore on AC/Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state whatever the system state
before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]