Filter
Top Products
4-18 Chapter 4: BIOS setup
The following items appear only when you set the AI Overclocking item to
[manual].
FSB Frequency [200]
Allows you to adjust the FSB frequency. The value of this item is auto-detected by the
BIOS. Use the <+> and <-> keys to adjust the FSB frequency. You can also type the
desired FSB frequency using the numeric keypad. The values range from 200 to 400.
PCIE Frequency [100]
Allows you to adjust the PCIE frequency. The value of this item is auto-detected by the
BIOS. Use the <+> and <-> keys to adjust the PCIE frequency. You can also type the
desired PCIE frequency using the numeric keypad. The values range from 100 to 200.
The following items appear only when you set the AI Overclocking item to
[manual] or [EPP Memory].
CPU1/CPU2 VCORE Over-Voltage [Auto]
Allows you to enable or disable VCORE over-voltage.
Conguration options: [Auto] [+50mV] [+100mV] [+150mV] [+200mV]
DDR VTT Switch [Auto]
Conguration options: [Auto] [0.6 x DDR Voltage] [0.5 x DDR Voltage]
DDR Voltage [Auto]
Allows you to set the DDR memory voltage.
Conguration options: [Auto] [1.800V] [1.825V] [1.850V]...[2.475V] [2.500V]
Setting a very high voltage may damage the component permanently. Setting a
very low voltage may cause the system to become unstable.
HyperTransport Voltage [Auto]
Allows you to set the Hypertransport voltage.
Conguration options: [Auto] [1.200V] [1.250V] [1.300V] [1.350V] [1.400V]
1.5V Voltage [Auto]
Conguration options: [Auto] [1.500V] [1.525V] [1.550V]...[1.675V] [1.700V]
1.5V Stand-By Voltage [Auto]
Conguration options: [Auto] [1.500V] [1.600V] [1.700V]
AI Clock Skew 1 for Channel A/Channel B [Auto]
Conguration options: [Auto] [Normal] [Advance 150ps] [Advance 300ps]
...[Advance 900] [Delay 150ps] [Delay 300ps]...[Delay 900]
AI Clock Skew 2 for Channel A/Channel B [Auto]
Conguration options: [Auto] [Advance 900] [Advance 750ps] [Advance 600ps]
...[Advance 150] [Normal] [Delay 150ps] [Delay 300ps]...[Delay 900]