Filter
Top Products
4-32 Chapter 4: BIOS setup
4.5.5 Hardware Monitor
Hardware Monitor
CPU1 Temperature [60ºC/140ºF]
CPU2 Temperature [60ºC/140ºF]
MB Temperature [46ºC/114.5ºF]
Smart Fan Control [Disabled]
CPU Fan Mode [PWM]
CPU Fan1 Speed [2564RPM]
CPU Fan2 Speed [4354RPM]
CHA Fan1 Speed [N/A]
CHA Fan2 Speed [N/A]
SPS Fan Speed [4655RPM]
HP Fan3 Speed
VCORE1 Voltage [ 1.440V]
VCORE2 Voltage [ 1.440V]
3.3V Voltage [ 2.992V]
5V Voltage [ 4.889V]
12V Voltage [10.579V]
CPU1/CPU2 Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select [Disabled] if you do not wish to display the detected
temperatures.
Smart Fan Control [Disabled]
Allows you to enable or disable the smart fan feature that smartly adjusts the fan
speeds for more efcient system operation. Conguration options: [Disabled]
[Enabled]
CPU Fan Mode [PWM]
Allows you to select the type of CPU fan cable connected to the CPU fan
connector. Set to [PWM] when using a 4-pin CPU fan cable. Set to [DC] when
using a 3-pin CPU fan cable. Conguration options: [PWM] [DC]
Some CPU fans with a 4-pin cable do not comply with Intel
®
’s PWM fan
specication. When using this type of CPU fan, you can not reduce the CPU fan
speed even if you set the CPU Q-Fan Mode to [PWM].
CPU Fan1/Fan2 Speed (RPM) [xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the eld shows N/A. Select [Ignore] from the item options to disable
CPU fan speed monitoring.
CPU Temperature