Filter
Top Products
ASUS M3N WS 3-29
SATA Operation Mode [IDE]
Allows you to select the onboard Serial ATA type.
Conguration options: [IDE] [RAID] [AHCI]
• If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, keep the default setting [IDE].
• If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows
the onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing the drive
to internally optimize the order of commands.
• If you want to create a RAID 0, 1, 0+1, 5, or JBOD conguration from the
Serial ATA hard disk drives, set this item to [RAID].
• SATA 5-6 connectors support AHCI mode and RAID mode only. Make sure
to install the AHCI driver or RAID driver in the bundled support DVD before
connecting devices to SATA 5-6 connectors. Otherwise, the devices will not
work.
• Due to chipset limitation, when set any of SATA ports to RAID mode, all
SATA ports run at RAID mode together.
Onboard 1394 [Enabled]
Allows you to enable or disable the onboard 1394 device support.
Conguration options: [Disabled] [Enabled]
HD Audio [Enabled]
Allows you to enable or disable the High-Denition audio CODEC.
Conguration options: [Enabled] [Disabled]
HDMI Audio [Auto]
Allows you to disable or enable the HDMI Audio function.
Conguration options: [Auto] [Disabled]
Make sure to set the HDMI Audio item to [Auto] to enable HDMI audio output.
Onboard LAN / Onboard 2nd LAN [Enabled]
Allows you to enable or disable the onboard LAN devices.
Conguration options: [Disabled] [Enabled]
Onboard LAN / LAN2 Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Conguration options: [Enabled] [Disabled]