Asus M3N-HD Computer Hardware User Manual


 
ASUS M3N-HD/HDMI 4-25
MCP Storage Cong
Select Menu
Item Specic Help
Phoenix-Award BIOS CMOS Setup Utility
Advanced
MCP Storage Cong
SATA Operation Mode [IDE]
SATA Operation Mode [IDE]
Allows you to select the onboard Serial ATA type.
Conguration options: [IDE] [RAID] [AHCI]
If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, keep the default setting [IDE].
If you want the Serial ATA hard disk drives to use the Advanced Host
Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows
the onboard storage driver to enable advanced Serial ATA features that
increases storage performance on random workloads by allowing the drive
to internally optimize the order of commands.
If you want to create a RAID 0, 1, 0+1, 5, or JBOD conguration from the
Serial ATA hard disk drives, set this item to [RAID].
SATA 5-6 connectors support AHCI mode and RAID mode only. Make sure
to install the AHCI driver or RAID driver in the bundled support DVD before
connecting devices to SATA 5-6 connectors. Otherwise, the devices will not
work.
Due to chipset limitation, when set any of SATA ports to RAID mode, all
SATA ports run at RAID mode together.
Onboard 1394 [Enabled]
Allows you to enable or disable the onboard 1394 device support.
Conguration options: [Disabled] [Enabled]
HD Audio [Auto]
Allows you to enable or disable the High-Denition audio CODEC.
Conguration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC`97
or high-denition audio depending on the audio standard that the front panel audio
module supports.
Conguration options: [AC97] [HD Audio]