Filter
Top Products
3-10
Chapter 3: BIOS setup
Chapter 3
3.4.1 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking conguration options:
[Auto] Loads the optimal settings for the system.
[Manual] Allows you to individually set overclocking parameters.
[D.O.C.P.] Allows you to select a DRAM O.C. prole, and the related parameters will
be adjusted automatically.
CPU Bus Frequency [XXX]
This item appears only when you set the AI Overclock Tuner item to [Manual] or [D.O.C.P.]
and allows you to adjust the CPU and VGA frequency to enhance the system performance.
Use the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 100.0MHz to 600.0MHz.
PCIE Frequency [Auto]
This item appears only when you set the AI Overclock Tuner item to [Manual] or [D.O.C.P.]
and allows you to adjust PCIE frequency to enhance the system performance. Use the <+>
and <-> keys to adjust the value. You can also key in the desired value using the numeric
keypad. The values range from 100.0MHz to 150.0MHz.
This item appears only when you set the AI Overclock Tuner item to [D.O.C.P.] and allows
you to select a DRAM O.C. prole, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Conguration options: [DDR3-1600MHz] [DDR3-1800MHz]
[DDR3-1866MHz] [DDR3-2000MHz] [DDR3-2133MHz] [DDR3-2200MHz] [DDR3-2400MHz]
3.4.2 OC Tuner [CANCEL]
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press <Enter> to start auto tuning. It takes around ve minutes, and the system will reboot for
several times until auto tuning is completed.Conguration options: [CANCEL] [O�]Conguration options: [CANCEL] [O�]
The conguration options for the following sub-items vary depending on the CPU/DIMMs
you install on the motherboard.
3.4.3 CPU Ratio [Auto]
Allows user can manually adjust the maximum non-CPB mode CPU ratio. The value will be
limit to CPU base or factory setting. Use the <+> and <-> keys to adjust the ratio. The valid
value ranges vary according to your CPU model.
3.4.4 AMD Turbo CORE technology [Auto]
Allows you to enable or disable AMD Turbo CORE technology. Conguration options: [Auto]
[Disabled] [Enabled]
3.4.5 Memory Frequency [Auto]
Allows you to set the memory operating frequency.
Conguration options: [Auto] DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1600MHz] [DDR3-1866MHz] [DDR3-2133MHz] [DDR3-2400MHz]