Asus P2B-F Computer Hardware User Manual


 
66 ASUS P2B-F User’s Manual
VI. SOFTWARE REFERENCE
After you attempt to wake up a computer, the status of that computer changes in the
list view to a Wake Pending status. If the attempt to wake up a computer is success-
ful, the Wake Pending status changes to a status reflecting the computer’s health
(such as Normal, Warning, or Critical). If the computer does not wake up after five
minutes, a message box appears stating possible reasons why the computer did not
respond. (For example, the computer may be disabled or may not support Wake-On-
LAN.) After clicking OK, the Wake Pending status reverts to its original status of
Unavailable or Wakeable.
NOTE: You computer must have a Wake-On-LAN network adapter to support this
feature. Some computers that support the Wake-On-LAN technology may have re-
mote wakeup disabled in the BIOS by default. Before Client Manager can wake up
a remote computer, you will need to enable this option in the BIOS configuration of
each remote computer.
Displaying the Properties of a Client Computer
You can display the properties of any discovered client computer even if you cannot
otherwise access the computer because of access limitations or Unavailable status.
If you display the properties of an unavailable computer, the properties are read
from a database in the Windows registry on your computer. Since the Operating
System information is not stored in this same database, that information is not avail-
able for a computer with a status of Unavailable. Remember that some items may
not be current if the properties have changed while the computer was off the net-
work.
VI. S/W REFERENCE
Intel LDCM