Filter
Top Products
1-22
Chapter 1: Product introduction
The System Panel connector is color-coded for easy and foolproof connection.
Take note of the specific connector colors as described.
• Reset Switch Lead (Blue 2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
•ATX Power Switch / Soft-Off Switch Lead (Yellow 2-pin PWRBTN )
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT
OFF, depending on the BIOS or OS settings. Pressing the power switch while
in the ON mode for more than four seconds turns the system OFF.
• Hard disk activity LED (Red 2-pin IDE_LED)
This connector supplies power to the hard disk activity LED. Any read or write
activity of an IDE device causes this LED to light up.