Asus P4PE2-X Computer Hardware User Manual


 
ASUS P4PE2-X motherboard
2-19
ECP Mode DMA Channel [DMA3]
Sets the ECP Mode DMA channel. This item appears only when the Parallel
Port Mode is set to ECP. Configuration options: [DMA0] [DMA1] [DMA3]
EPP Version [1.9]
Sets the EPP Version. This item appears only when the Parallel Port Mode is
set to EPP. Configuration options: [1.9] [1.7]
Parallel Port IRQ [IRQ7]
Selects the Parallel Port IRQ. Configuration options: [IRQ5] [IRQ7]
Onboard Game/MIDI Port [Disabled]
Allows you to select the Game Port address or to disable the port.
Configuration options: [Disabled] [200/300] [200/330] [208/300] [208/330]
2.4.5 PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP
devices. The menu includes setting IRQ and DMA channel resources for either
PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA
devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values may cause the system to malfunction.
Plug And Play O/S [No]
PCI Latency Timer [64]
Allocate IRQ to PCI VGA [Yes]
PCI IDE BusMaster [Enabled]
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause the system to malfunction.
Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to [Yes]
and if you installed a Plug & Play operating system, the operating system
configures the Plug & Play devices not required for boot.
Configuration options: [No] [Yes]
IRQ3 [Available]
IRQ4 [Available]
IRQ5 [Available]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]