Filter
Top Products
ASUS P4PE BP motherboard user guide
2-21
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port. [Normal] allows
normal-speed operation but in one direction only; [EPP] allows bidirectional parallel
port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode;
[ECP+EPP] allows normal speed operation in a two-way mode. Configuration
options: [Normal] [EPP] [ECP] [ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the selected
ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in
Parallel Port Mode above. Configuration options: [1] [3]
Onboard AC97 Audio Controller [Auto]
[Auto] allows the BIOS to detect whether you are using any audio device.
If an audio device is detected, the onboard audio controller is enabled; if
no audio device is detected, the controller is disabled. Configuration
options: [Disabled] [Auto]
Onboard Game Port [200H-207H]
This field sets the I/O address for the game port. Configuration options: [Disabled]
[200H-207H] [208H-20FH]
Onboard MIDI I/O [Disabled]
This field sets the I/O address for the MIDI I/O port. Configuration options:
[Disabled] [330H-331H] [300H-301H]
Speech POST Reporter [Enabled]
This field enables or disables the ASUS POST Reporter™ feature. When set to
Enabled, the items Report IDE Error, Report System Checking, and Report
System Booting appear to allow customized configuration. Configuration options:
[Disabled] [Enabled]
Report IDE Error [Enabled]
This item allows you to enable or disable IDE error reporting. When set to Enabled,
you will hear an error message through the POST Reporter whenever the system
detects an IDE error. Configuration options: [Disabled] [Enabled]
Report System Checking [Enabled]
This item allows you to enable or disable system check reporting. When set to
Enabled, you will hear a message through the POST Reporter whenever the
system is performing a self-check. Configuration options: [Disabled] [Enabled]
Report System Booting [Enabled]
This item allows you to enable or disable system boot reporting. When set to
Enabled, you will hear a message through the POST Reporter whenever the
system boots. Configuration options: [Disabled] [Enabled]