![](http://pdfasset.owneriq.net/4/71/471b1eb3-2242-4b90-956c-532d0cb474ac/471b1eb3-2242-4b90-956c-532d0cb474ac-bg2a.png)
28
Chapter 2: Hardware information
P4T533
®
P4T533 RAID IDE Setting
RAID_SW
Enable
Onboard RAID
Disable
(Default)
12 23
10. RAID IDE Setting (3 pin RAID_SW)
This jumper controls the IDE circuit to enable or disable the RAID protocol.
By default, [1-2], the system enables the use of RAID. Reset the jumper to
[2-3] to entirely disable the use of the RAID protocol.