Filter
Top Products
ASUS P4T533 motherboard user guide
67
AGP/PCI Frequency Setting [Auto]
When set to [Auto], this field allows automatic selection of AGP/PCI frequency
to enhance system performance and overclocking capability. The setting
[Manual] allows you to manually select the AGP/PCI frequency. If the system
becomes unstable, return to the default setting [Auto]. When this item is set
to [Manual], the
AGP/PCI Frequency (MHz) item appears. Configuration options:
[Auto] [Manual]
Selecting a very high AGP/PCI frequency may cause the system to be
unstable!
AGP/PCI Frequency (MHz) [66.66/33.33]
This item appears only when the AGP/PCI Frequency Setting is set to [Manual].
This field allows you to select a higher AGP/PCI frequency for better system
performance.
CPU VCore Setting [Auto]
This field determines if the CPU Vcore is automatically scaled or set manually
by the user. The default for this field is [Auto], so the CPU vcore voltage is
set for maximum performance without stressing the CPU. Configuration
options: [Manual] [Auto]
CPU VCore [1.750V] (for Willamette), [1.500V] (for Northwood)
When the CPU VCore Setting parameter above is set to [Manual], the CPU
VCore item allows you to select a specific CPU core voltage. This field is not
accessible when the CPU VCore Setting is set to [Auto]. Depending on the
OVER_VOLT jumper setting (see page for the jumper location and settings),
the CPU core voltage options vary for both Willamette and Northwood
processors. See the following table:
Disabled Enabled
Willamette 1.750V, 1.775V, 1.800V, 1.750V, 1.775V, 1.800V,
1.825V, 1.850V 1.825V, 1.850V, 1.875V,
1.900V, 1.925V, 1.950V
Northwood 1.500V, 1.525V, 1.550V, 1.500V, 1.525V, 1.550V,
1.575V, 1.600V, 1.625V, 1.575V, 1.600V, 1.625V,
1.650V, 1.675V, 1.700V 1,650V, 1.675V, 1.700V,
1.725V, 1.750V, 1.775V,
1.800V
OVER_VOLT
Jumper
P4 Processor