Filter
Top Products
ASUS P4T533 motherboard user guide
41
19. Smart Card Reader Connector (14-1 pin SMARTCON) (Optional)
This connector accommodates a Smart Card Reader that enables
convenient transactions involving finance, health care, telephony, and
travel services using a Smart Card user interface software. When using
this connector, enable the field: “Onboard Smart Card Reader” in section
“4.4.2 I/O Device Configuration.”
P4T533
®
P4T533 Smartcard
SMARTCARD
NC
SCRFET#
NC
NC
NC2
VCC
GND
SCRUI
SCRRES#
NC
SCRCLK
1
NC
SCRREST
P4T533
®
P4T533 Internal Line Out Connectors
FP_LO_SWL
FP_LO_SWR
BLOL
FLOL
BLOR
FLOR
20. Line-out Selector Jumpers (Two 2 pin FP_LO_SWL, FP_LO_SWR)
By default, these jumpers are shorted (jumpers on) to route the signal from
the audio controller to the rear panel Line Out jack to make it available for
audio out devices such as speakers or a headphone. If you connect the Intel
Front Panel audio cable to the IPANEL connector, (see above) then remove
the caps from these two jumpers to permit automatic switching of audio signals
between the rear panel Line Out jack and the Intel audio cable.