Filter
Top Products
2-24
Chapter 2: BIOS information
Restore on AC Power Loss [Power Off]
This item sets the system status after restore on AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Wake Up/Power On by Ring [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On by Onboard LAN [Disabled]
Allows you to enable or disable the onboard LAN to generate PME in SoftOFF
mode. Configuration options: [Disabled] [Enabled]
Power On by PCI Device [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On by RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]
Power On by PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to
resume the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On by PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on the keyboard to turn on the
system. When set to [S5], the item Wake-up Key is enabled. This feature requires
an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [S5]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.