Filter
Top Products
5-285-28
5-285-28
5-28
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
Channel 0 Interrupt: B I/P Port: 0000AC00
Channel 1 Interrupt: B I/P Port: 0000A800
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ RAID Card Configuration ]
[ RAID Card Resource ]
Auto-Rebuild: Enable
∗∗
∗∗
∗ : Capacity (GB) Drive Mode: P = PIO, D = DMA, U = UDMA
[
→→
→→
→,
←←
←←
←,Space] Change Option [ESC] Exit
Channel Size Drive
ID Drive Name (MB) Array No Mode
Pri/D0 XXXXXXXXXXXXXX XXXXXX Array 0 U5
Pri/D1 XXXXXXXXXXXXXX XXXXXX Array 0 U2
Sec/D0 XXXXXXXXXXXXXX XXXXXX Array 0 U4
Sec/D1 XXXXXXXXXXXXXX XXXXXX Array 0 U6
[ Drive Status ]
Viewing your RAID configurationViewing your RAID configuration
Viewing your RAID configurationViewing your RAID configuration
Viewing your RAID configuration
This option allows you to view the system RAID configuration and RAID
resources. You can also enable or disable the Auto-Rebuild function from
this menu.
To view your RAID configuration:
1. Press <5> from utility main menu. The following screen appears.
2. View your RAID configuration from this menu, then press <Esc> to
exit the utility.
To enable/disable the Auto-Rebuild feature:
1. Use the left/right arrow keys or the space bar to enable or disable
the
Auto-RebuildAuto-Rebuild
Auto-RebuildAuto-Rebuild
Auto-Rebuild item.
2. Press <Esc> to exit the utility.