Asus P5B-VM DO Computer Hardware User Manual


 
ASUS P5B-VM DO 1-35
6. JMicron JMB363
®
Serial ATA RAID connector (7-pin SATA_RAID1)
This connector is for a Serial ATA signal cable. This connector supports a
Serial ATA hard disk drive, which you can combine with an external Serial
ATA hard disk drive to congure for RAID via the unboard Serial ATA RAID
controller.
The JMicron controller mode item in the BIOS is set to [BASIC] by default.
When set to [RAID], this item allows you to use the connectors to build a RAID
set. See section “2.4.6 Onboard Device Conguration” for details.
Before creating a RAID set using Serial ATA hard disks, make sure that you
have connected the Serial ATA signal cables and installed Serial ATA hard disk
drives; otherwise, you cannot enter the JMicron
®
JMB363 RAID utility and SATA
BIOS setup during POST.
7. TPM connector (20-1 pin TPM_SLOT)
This connector supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certicates, passwords, and data. A TPM system
also helps enhance network security, protects digital identities, and ensures
platform integrity. See section “2.4.3 TPM Conguration” for details.
R
P5B-VM DO
P5B-VM DO TPM connector
TPM
GND
smb_dk_main
smb_data_main
LAD2
LAD1
GND
X
SERIRQ
X
X
CK_33M_TPM
LFRAMEn
LRESETn
LAD3
+3.3V
LAD0
+3.3V
x
GND
LPC.PD#
R
P5B-VM DO
P5B-VM DO SATA RAID connector
SATA_RAID1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND