Asus P5Q WS Computer Hardware User Manual


 
ASUS P5Q WS 3-21
Ai Transaction Booster [Auto]
Allows you to set the system performance.
Conguration options: [Auto] [Manual]
The following two sub-items appear only when you set the Ai Transaction
Booster item to [Manual].
Common Performance Level [05]
Set this item to a higher level for better compatibility or a lower level for
better performance. Use the <+> and <-> keys to adjust the value or type theype the
desired value using the numeric keypad. The values range from 1 to 31.. The values range from 1 to 31.
Pull-In of CHA/B PH1/2/3/4 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B,
Phase 1 to 4. The number of phases is determined by DRAM frequency and
FSB strap. Conguration options: [Disabled] [Enabled]
The following ten (10) items are adjusted by typing the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
2.0000V* with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage.
Setting a high VCore voltage may damage the CPU permanently, and
setting a low VCore voltage may make the system unstable.
*The value [2.0000V] of the CPU Voltage item is supported only if the
OV_CPU jumper is enabled; otherwise the maximum voltage supported is
[1.70000V]. See 2. CPU / Northbridge overvoltage setting on page 2-20
for details.
CPU GTL Voltage Reference(0/2) [Auto]
Allows you to set the CPU GTL voltage reference. The values range from 0.370x
to 0.760x with a 0.005x interval. Different ratio might enhance CPU overclocking
ability.
CPU GTL Voltage Reference(1/3) [Auto]
Allows you to set the CPU GTL voltage reference. The values range from 0.410x
to 0.800x with a 0.005x interval. Different ratio might enhance CPU overclocking
ability.