Filter
Top Products
ASUS P5Q-EM DO 3-9
3.3.2 Creating a RAID driver disk in Windows
®
To create a RAID driver disk in Windows
®
:
1. Start Windows
®
.
2. Place the motherboard support DVD into the optical drive.
3. Go to the
Make disk
menu, and then click
Intel ICH10R 32/64 bit RAID Driver Disk
to
create an Intel
®
ICH10R RAID driver disk.
4. Insert a oppy disk into the oppy disk drive or connect a USB ash disk if you are
using Windows Vista OS.
5. Follow succeeding screen instructions to complete the process.
Write-protect the oppy disk to avoid computer virus infection.
3.3 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing Windows
®
XP/Vista and later
operating system on a hard disk drive that is included in a RAID set. For Windows Vista user,
you can create a RAID driver disk with a oppy disk drive or a USB ash disk drive.
3.3.1 Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS:
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. Press any key when the system prompts “Press any key to boot from the optical drive.”
7. When the menu appears, press <1> to create a RAID driver disk.
8. Insert a formatted oppy disk into the oppy drive then press <Enter>.
9. Follow succeeding screen instructions to complete the process.
To install the RAID driver in Windows XP:
1. During the OS installation, the system prompts you to press the <F6> key to install
third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk drive.
3. When prompted to select the SCSI adapter to install, make sure you select
Intel(R)
SATA RAID Controller (Desktop ICH10R)
.
4. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista:
1. Insert the oppy disk/USB device with RAID driver into the oppy disk drive/USB port.
2. During the OS installation, select Intel(R) SATA RAID Controller (Desktop ICH10R).
3. Follow the succeeding screen instructions to complete the installation.
P5Q-EM DO.indb 9 12/9/08 12:36:32 PM