1-28 Chapter 1: Product introduction
2. Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output. Connect
one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF
module.
The S/PDIF out module is purchased separately.
SPDIF_OUT
+5V
SPDIFOUT
GND
P5Q-EM DO
P5Q-EM DO Digital audio connector
1.10.2 Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the oppy disk drive (FDD) signal cable. Insert one end of the
cable to this connector, then connect the other end to the signal connector at the back
of the oppy disk drive.
• Pin 5 on the connector is removed to prevent incorrect cable connection when using a
FDD cable with a covered Pin 5.
• The oppy disk drive singal cable is purchased separately.
P5Q-EM DO
P5Q-EM DO Floppy disk drive connector
FLOPPY
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
PIN1
P5Q-EM DO.indb 28 12/9/08 12:34:23 PM