Asus P5QL-CM Computer Hardware User Manual


 
2-12 Chapter 2: BIOS information
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Conguration options: [Enabled] [Disabled]
2.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the submenu.
North Bridge Conguration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Conguration options: [Disabled] [Enabled]
Congure DRAM Timing by SPD [Enabled]
Allows you to enable or disable conguring the DRAM Timing by SPD.
Conguration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Conguration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Sets the IGD graphics mode.
Conguration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
DVMT Mode Select [DVMT Mode]
Allows you to select the graphics memory type.
Conguration options: [DVMT Mode]
DVMT Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
The following item appears only when you installed an Intel
®
CPU that supports the
Enhanced Intel
®
SpeedStep
®
Technology (EIST).
This option only appears when installing 1GB DDR2 DIMMs into the DIMM sockets.
Protect Audio Video Path Mode [Disabled]
Allows you to set PAVP mode.
Conguration options: [Disabled] [Lite] [Paranoid]