Filter
Top Products
1-22 Chapter 1: Hardware information
2. BIOS Recovery (3-pin RECOVERY1)
This jumper allows you to recover your original BIOS from a floppy disk in
case the BIOS and data are corrupted.
To recover the BIOS:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3.
3. Inset a power cord and turn ON the computer.
4. Plug the power cord and turn ON the computer.
5. The system searches for the BIOS file in the floppy then reflashes the
BIOS.
6. When finished, shut down your computer.
7. Replace the jumper cap from pins 2-3 to pins 1-2.
8. Reboot your computer.
9. Hold down the <Del> key during the boot process and enter BIOS set-up
to re-enter data.
P5SD2-FM
r
®
P5SD2-FM BIOS Recovery Setting
BIOSREC
2312
Normal
(Default)
Recovery
CPU_SEL
For new Intel CPU types
Default setting pin 1-2
For the current CPU types there is no need to change this jumper.