Filter
Top Products
ASUS P5V800-MXASUS P5V800-MX
ASUS P5V800-MXASUS P5V800-MX
ASUS P5V800-MX
2-272-27
2-272-27
2-27
2.5.32.5.3
2.5.32.5.3
2.5.3
ACPI 2.0 Support [No]ACPI 2.0 Support [No]
ACPI 2.0 Support [No]ACPI 2.0 Support [No]
ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
2.5.42.5.4
2.5.42.5.4
2.5.4
ACPI APIC Support [Enabled]ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]ACPI APIC Support [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
2.5.52.5.5
2.5.52.5.5
2.5.5
APM ConfigurationAPM Configuration
APM ConfigurationAPM Configuration
APM Configuration
APM Configuration
Power Management/APM [Enabled]
Restore on AC Power Loss [Power Off]
Resume On Ring [Disabled]
Resume On PME# [Disabled]
Resume On PS/2 Keyboard [Disabled]
Resume On PS/2 Mouse [Disabled]
Resume On RTC Alarm [Disabled]
Power Management/APM [Enabled]Power Management/APM [Enabled]
Power Management/APM [Enabled]Power Management/APM [Enabled]
Power Management/APM [Enabled]
Allows you to enable or disable the advanced power management feature.
Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power OFF] [Power On] [Last State]
Resume On Ring [Disabled]Resume On Ring [Disabled]
Resume On Ring [Disabled]Resume On Ring [Disabled]
Resume On Ring [Disabled]
When set to [Enabled], the system enables the RI to generate a wake
event while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]