Filter
Top Products
ASUS P/I-P55T2P4S User’s Manual 61
VI. EZ-SCSI UTILITY
(Intro/Quick Start)
VI. ADAPTEC EZ-SCSI UTILITY
Welcome to Adaptec EZSCSI
®
4.00e Adaptec EZSCSI gives you what you need to
use your SCSI devices most effectively with Windows
®
95 and WindowsNT™. You
can also use Adaptec EZSCSI on computers running DOS, Windows
®
3.1x, or Win-
dows for Workgroups3.1x.
Quick Start Instructions
First, install SCSI devices (see the hardware documentation for details). Then fol-
low the instructions for your operating system software in one of the following sec-
tions. We recommend that after you install Adaptec EZSCSI you run SCSITutor to
learn more about the features of SCSI.
Windows95 or WindowsNT
If you want to install Windows95 or WindowsNT on a new computer system, you
may not be able to access your SCSI CDROM drive at first. (Usually, you install
Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM
drive, follow the DOS Quick Start instructions on page 4. Then reboot your com-
puter and follow these instructions:
1 Install Windows95 or WindowsNT version 3.51 or above, and start it running
on your computer.
2 Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.
3 Click the Start button and select Run.
4 Type a:\setup if you are using the A drive or b:\setup if you are using the B
drive. Then click OK.
5 Follow the instructions that appear on the screen.
Windows/Windows for Workgroups 3.1x
1 Install Windows3.1x or Windows for Workgroups3.1x and start it running on
your computer.
2 Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.
3 Select File/Run from the Program Manager menu.
4 When the Run dialog box appears, type a:\setup if you are using the A drive or
b:\setup if you are using the B drive. Then click OK.
5 Follow the instructions that appear on the screen.
DOS
1 Install DOS6.x or above and start it running on your computer.
2 Insert the Adaptec EZSCSI Setup Diskette in your floppy disk drive.
3 At the DOS prompt, type a:\install (assuming your 3.5” floppy is A: drive).
Then press Enter.
4 Follow the instructions that appear on the screen.