Filter
Top Products
ASUS P/I-XP6NP5 User’s Manual 7
III. INSTALLATION
III. INSTALLATION
(Jumpers)
1. Onboard Multi-I/O Selection (JP14)
You can disable the onboard Multi-I/O (floppy, serial, parallel, and IrDA) through
BIOS (see CHIPSET FEATURES SETUP) and with the following jumper in
order to use your own Multi-I/O card.
Multi-I/O JP14
Enable [1-2] (Default)
Disable [2-3]
Super Multi-I/O (Enable / Disable)
Enable I/O (Default)
Disable I/O
JP14
1
2
3
1
2
3
JP14
2. Flash ROM Boot Block Programming (JP17)
This sets the operation mode of the boot block area of the BIOS Flash ROM to
allow programming in the Enabled position.
Programming JP17
Disabled [1-2] (Default)
Enabled [2-3]
Boot Block Programming (Disable / Enable)
JP17
Disable (Default) Enable
JP17