Filter
Top Products
2-12
Chapter 2: Hardware information
2.7 Switches and jumpers
2.7.1 Switches
The following figure shows the location and default settings of the DIP
switches on the motherboard.
DO NOT change the settings of the Reserved switches.
1. CPU external frequency selection (SW1 Switches 1-5)
This option tells the clock generator what frequency to send the CPU.
This allows the selection of the CPU’s external frequency (or Bus
Clock). The BUS Clock multiplied by the Frequency Multiple equals the
CPU’s internal frequency (the advertised CPU speed).
To select the CPU external frequency using the DIP switches, ensure
that the JEN jumper is set to jumper mode.
PR-DLSR533
®
PR-DLSR533 DIP Switches
ON
1.Frequency Selection
2.Frequency Selection
3.Frequency Selection
4.Frequency Selection
5.Reserved(Must On)
1.Reserved(Must Off)
2.Reserved(Must Off)
3.Reserved(Must Off)
4.Reserved(Must Off)
5.Frequency Multiple
6.Frequency Multiple
7.Frequency Multiple
8.Frequency Multiple
OFF
SW1
ON
12345
SW2
ON
12345678
ON OFF
PR-DLSR533
®
PR-DLSR533 CPU
External Frequency Selection
SW1
CPU
ON
12345
133MHz
ON
12345
100MHz