Filter
Top Products
4-20
Chapter 4: BIOS Setup
Onboard SCSI BIOS [Auto]
[Auto] allows the motherboard BIOS to detect whether you have a Adaptec
SCSI controller. If the SCSI controller is detected, the SCSI BIOS will be
enabled. If no SCSI controller is detected, the onboard SCSI BIOS will be
disabled.
Setting to [Disabled] deactivates the onboard SCSI BIOS so that the
BIOS on an add-on SCSI card can be used. If your SCSI card does not
have a BIOS, the SCSI card will not function. Configuration options: [Auto]
[Disabled]
Onboard SCSI Primary Term [Enabled]
Onboard SCSI Secondary Term [Enabled]
This field allows you to enable or disable the onboard termination for the
primary and secondary SCSI channels. Configuration options: [Enabled]
[Disabled]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Enabled]
Onboard 2nd LAN Boot ROM [Enabled]
When set to [Enabled], these fields allow the system to boot from the
network using the onboard LAN controller boot ROM. Configuration
options: [Disabled] [Enabled]