Filter
Top Products
26
RX3041 V2 Router User’s Manual
2.4.6 L2TP
The L2TP window allows user to congure basic L2TP settings for the router.
L2TP Account: Enter the L2TP Account provided by the ISP.
L2TP Password: Enter the password provided by the ISP.
Retype Password: Retype the password for conrmation purposes.
L2TP Gateway: If your LAN has a L2TP gateway, then enter that L2TP gateway IP
address here. If you do not have a L2TP gateway then enter the ISP’s Gateway IP
address.
IP Address: This is the IP address provided by your ISP to establish a L2TP connection.
MTU: This is optional. You can specify the maximum size of the packets transmitted to
the Internet. Leave it as it is if you do not wish to set a maximum packet size.
Maximum Idle Time: You can specify an idle time threshold (minutes) for the WAN
port. This means if no packet has been sent (no one using the Internet) during this
specied period, the router will automatically end its connection with your ISP.
Connection Mode: To select L2TP connection mode, it includes keep-alive, auto-
connect and manual-on.