Filter
Top Products
RX3041 V2 Router User’s Manual
39
2.8.3 Dynamic Routing
Dynamic Routing can be used to cache routes learned by routing protocols, thus
allowing the automation of static routing maintenance. The router, using the RIP
(Routing Information Protocol), determines the network packet’s route based on the
fewest number of hops between the source and the destination. In this case, you can
automatically adjust to physical changes in the network layout.
Working Mode: Select the router acts as router or gateway.
Listen Mode: Enable this mode to allow RIP server to receive routing information and
update the routing information.
Supply Mode: Enable this mode to allow RIP server to send out routing information
and update the routing information.