Filter
Top Products
22
Chapter 1: System introduction
1.6 LED panel
The LED panel displays various system
information depending on the system
mode.
The LED panel displays the system time in
24-hour format when the system is in soft-off
or stand-by mode, S3 (Suspend-to-RAM), or
S4 (Suspend-to-Disk) state. Enter the BIOS
setup or the operating system to adjust the
time.
Audio DJ mode
The LED panel displays various information when the system is in Audio
DJ mode.
In CD mode, the LED panel displays the
play/pause icon, number, and duration of
the audio CD track being played.
CD mode, play/paused status
FM radio mode
In Radio mode, the LED panel displays
the station preset number and station
frequency. Refer to the section below on
how to preset a radio station.
Presetting a radio station
To preset a radio station:
1. Put the Audio DJ in Radio mode.
2. Use the PLAY/PAUSE button for less than 2 seconds to scan the
radio frequency, then select the station you wish to preset.
4. Press the PLAY/PAUSE button for more than 2 seconds until the
station frequency display in the LED panel blinks.
5. Use the NEXT or PREVIOUS button to select a preset number (1 ~ 9)
for the selected station.
6. Press the PLAY/PAUSE button to confirm the preset station.
Refer to page 46 on how to turn on the Audio DJ feature.