Filter
Top Products
5-24 Chapter 5: BIOS setup
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specic IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Conguration options: [PCI Device] [Reserved]
5.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM). Select an item then press <Enter> to
display the conguration options.
5.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Conguration and Power Interface
(ACPI) state to be used for system suspend.
Conguration options: [S1 (POS) Only] [S3 Only] [Auto]
5.5.2 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Conguration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt Controller
(APIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Conguration options: [Disabled] [Enabled]
5.5.3 Restore on AC Power Loss by IO [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Suspend Mode [Auto]
ACPI APIC Support [Enabled]
Restore on AC Power Loss by IO [Last State]
APM Conguration
Hardware Monitor
Select the ACPI state
used for System
Suspend.