Asus TXP4 Computer Hardware User Manual


 
ASUS TXP4 User’s Manual48
IV. BIOS SOFTWARE
AC PWR Loss Restart (Disabled)
This allows you to set whether you want your system to boot up after the power has
been interrupted. Disabled leaves your system off after reapplying power and En-
abled boots up your system after reapplying power.
Automatic Power Up (Disabled)
This allows you to have an unattended or automatic power up of your system. You
may configure your system to power up at a certain time of the day by selecting Every-
day, which will allow you to set the time or at a certain time and day by selecting By
Date.
IV. BIOS
(PnP / PCI)
PNP and PCI Setup
This “PNP and PCI Setup” option configures the PCI bus slots. All PCI bus slots on
the system use INTA#, thus all installed PCI cards must be set to this value.